Bed Size Chart

Every US, UK and Australian bed size in inches and centimeters. Enter your room and walkway space to see which sizes fit, drawn to scale, and compare any two beds side by side.

US bed sizes

Mattress width x length. Pick a row to draw it in your room below.

Size Width x length Typical sleeper Your sleepers Your room

Your room

Measure wall to wall. The headboard wall is the one the bed will stand against.

Feet can include inches, as in 10 6 or 10'6".

Walkways and frame

About 24 in (61 cm) beside each side is the usual target, 24 to 36 in at the foot.

A typical frame adds about 2.5 in on every side, so a 60 x 80 in queen becomes 65 x 85 in. Check the frame's listed outer size if you have it.

Who sleeps in it

Fills the "Your sleepers" column in the chart.

Tallest sleeper
ft in

Room plan

To scale. Shaded strips are walkways.

Top-down plan of the room with the bed and walkways.

Compare two sizes

Any two sizes, from any country, drawn on top of each other at the same scale.

Two bed outlines drawn to the same scale.

A king bed in the UK is not the same size as a king in the US. National Bed Federation figures, as listed on Wikipedia, put the UK king at 152 x 198 cm, while a US king is 193 cm wide. So a king can be 41 cm narrower than the bed a US chart describes.

A bed size chart is where you sort that out. It's a reference table listing the width and length of each standard mattress size, from the 38 x 75 inch twin to the 76 x 80 inch king and the 72 x 84 inch California king.

The point is to match a mattress to a frame and foundation, to fitted sheets, and to the floor space around the bed.

Standard Bed Sizes and Dimensions in Inches and Centimeters

Nearly every US purchase comes down to twin, twin XL, full, queen, king or California king.

SizeInches (W x L)Centimeters (W x L)Typical sleeper
Twin38 x 7596.5 x 190.5One child or teen
Twin XL38 x 8096.5 x 203One adult over 6 ft, or a teen
Full54 x 75137 x 190.5One adult under 6 ft
Queen60 x 80152.5 x 203A couple
King76 x 80193 x 203A couple, plus a child or pet
California king72 x 84183 x 213.5A taller couple

Sleep Foundation states that width and length are standardized for each size, while thickness varies by manufacturer and model. The chart covers the footprint only, so mattress height is a separate spec.

Full is also sold as a double. Some sellers list twin XL as twin long, and Living Spaces calls the king an Eastern king, 76 x 80 either way.

A king is sixteen inches wider than a queen. A California king is narrower than a standard king but offers 4 inches more length. Those two jumps are worth memorizing.

How to use this bed size chart

  1. Pick the country and the unit. The chart lists US standard and specialty sizes, UK sizes in both conventions, and Australian sizes, in inches or centimeters.
  2. Enter the headboard wall length and the room depth, or tap a preset such as 10 x 10 ft.
  3. Set the walkway at each side and at the foot, the frame type and any nightstands. Turn on "One long side against a wall" if the bed can go in a corner.
  4. Enter the number of sleepers and the tallest sleeper's height. The chart then marks which sizes are long and wide enough.
  5. Pick a row to draw that bed in the room plan, and use the comparison to put any two sizes on top of each other.

The "Your room" column shows every size at once: fits, fits only against a wall, fits only on the other wall, or how many inches it is short.

Which Bed Size Fits Which Sleeper?

Twin, twin XL and full are one-person beds. Queen, king and California king suit couples, plus whatever children or pets wander into the bed at 2 a.m.

Length is where people slip.

Mattress Nut gives a simple rule. Take the tallest sleeper, add 6 inches, and that's the minimum length needed.

Run that rule and a 75 inch mattress tops out at 5 ft 9 in. An 80 inch one gets you to 6 ft 2 in, and the 84 inch California king to 6 ft 6 in. Sleep Foundation draws the line for the 75 inch sizes at 6 ft, while Amerisleep tells sleepers over 6 ft 2 in to choose an 80 inch length.

The sources don't agree on the cutoff, so anyone who lands between them should take the 80 inch length.

Width works out by halving. A full leaves each partner 27 inches, which is narrower than a twin. A queen gives 30 inches each. A king gives 38, a twin's width per person.

How Much Room Does Each Bed Size Need?

Saatva's size guide gives a minimum room of 7 x 10 ft for a twin or twin XL and 10 x 10 ft for a full or queen. For the king and California king, its spec boxes say 10 x 10 ft, while the text of the same guide says 10 x 12 ft and 12 x 12 ft. Other brands set the bar higher for the large sizes.

Published minimum room sizes

SizeSaatvaOther published figure
Queen10 x 10 ft10 x 12 ft ideal (Mattress Nut)
King10 x 10 ft (10 x 12 ft in the same guide's text)12 x 12 ft (Mattress Stores Los Angeles, Zoma); 13 x 13 ft (Amerisleep)
California king10 x 10 ft (12 x 12 ft in the same guide's text)12 x 12 ft (Amerisleep)

Brands clearly don't agree on what "minimum" means. Saatva's own figures contradict each other, and Sleep Foundation gives no room minimum for a queen or king.

Walking clearance

Sleep Foundation recommends about 24 inches of space around each side of the bed.

Mattress Stores Los Angeles asks for at least 24 inches on each side and 36 inches at the foot. Treat those figures as the first step of space planning for the whole room, since nightstands, door swings and drawers all claim the same floor.

Worked example: a queen and a king in a 10 by 10 ft room

Start with the queen. A queen frame commonly measures about 62 to 66 inches wide and 82 to 88 inches long, so take 65 x 85 inches as a typical example. That is the calculator's "Typical frame" setting, which adds 2.5 inches on every side. Add 24 inches on both sides and the width need is 113 inches, or 9 ft 5 in. At the foot, 85 + 24 gives 109 inches, or 9 ft 1 in.

That fits a 10 ft room with about 7 inches to spare across the width and nowhere to put a nightstand. Nightstands typically need 18 to 24 inches each, which is why Mattress Nut calls 10 x 12 ft the ideal room for a queen.

The king is a tighter story. Many king frames are about 78 to 82 inches wide, so with 24 inches on both sides you need 126 to 130 inches (10 ft 6 in to 10 ft 10 in).

A 10 ft wide room falls 6 to 10 inches short, so a king there works only with one side against a wall. With the typical 81 inch frame, the calculator shows it 9 inches short. Saatva's 10 x 10 ft figure does not allow clearance on both sides.

In a tight bedroom, dropping one size usually beats squeezing the walkway. These ideas for decorating a small bedroom show how to use the floor you save.

King vs California King, Queen vs Full: Which Close-Call Size Wins?

King wins on width and California king on length. Queen beats full for any pair of sleepers, and the twin vs twin XL call mostly comes down to height.

King vs California king

The king is 76 x 80 and the California king is 72 x 84, so each gives up 4 inches in one direction.

Mattress Stores Los Angeles puts the decision simply. Go with a king for shoulder room, and a Cal king if either sleeper is over 6 ft 2 in or the bedroom is long and narrow.

The king's strength is width. Each sleeper gets 38 inches, which helps couples who also share the bed with a child. What it lacks is length, only 80 inches, and it wants a wide room to go with it. Zoma says 12 x 12 ft, and Amerisleep says 13 x 13 ft.

The California king goes the other way. It gives tall sleepers 84 inches, and the 72 inch width fits narrower rooms. The price is width: total width shrinks by 4 inches, or 2 inches per sleeper. Amerisleep sets the minimum room at 12 x 12 ft (12 x 14 ft in its king comparison).

The California king is older than most people think. The International Sleep Products Association found it dates to the 1920s, before the standard king, according to Wikipedia's bed size entry.

Queen vs full

A queen adds 6 inches of width and 5 inches of length over a full. Saatva lists the same 10 x 10 ft room for both, so floor space rarely settles it.

SizeProsCons
Queen30 inches per sleeper, 80 inches longWider frame to place
FullFine for one adult under 6 ftToo narrow for most couples

Pick the full only when one person sleeps there for good.

Twin vs twin XL

Both are 38 inches wide. The XL is 5 inches longer.

The twin works for children and for adults under 6 ft. Twin XL is the one for adults over 6 ft, and for college students.

What Are Olympic Queen, Split King, Alaskan King and Other Specialty Sizes?

Anything outside the six standard sizes counts as a specialty size. They can be trickier to find, and many require a custom order from a manufacturer.

Split king

A split king is two twin XLs side by side. Its overall size is 76 x 80 inches, the same as a standard king.

It costs more than an intact king. Split California kings exist too, but they are rare.

The format earns its price with an adjustable base, because each half then moves on its own. In Australia, Luxo Living notes, two long singles are commonly used together as a split king.

A 66 inch Olympic queen will not sit in a 60 inch queen frame. Order the frame and the sheets for the same size as the mattress.

How Do US, UK and Australian Bed Sizes Compare?

The same name can mean a different size in each country, so compare centimeters instead of labels. The UK "King" is the Australian queen, and the UK "Super King" is the Australian king.

Width classAustralia (cm)US (cm)UK (cm)
SingleSingle 92 x 188Twin 96.5 x 190.5Single 90 x 190
DoubleDouble 138 x 188Full 137 x 190.5Double 135 x 190
Queen widthQueen 153 x 203Queen 152.5 x 203King 150 x 200
King widthKing 183 x 203King 193 x 203Super King 180 x 200

Some pairs are close enough to swap. Ecosa puts the Australian and US queen about 1 cm apart in width, and the Australian double is about 1 cm wider than the US full and 2.5 cm shorter.

Australian sizes

The US chart has no row for several sizes that are common in Australia.

The super king has no US or UK equivalent, so frames and bases have to be made for it.

UK sizes

Retailers in the UK mix two measuring conventions, which gets confusing fast.

The older imperial-derived sizes follow the National Bed Federation figures, as listed on Wikipedia. That gives a single at 91 x 191 cm, a double at 137 x 191 cm, a king at 152 x 198 cm and a super king at 183 x 198 cm.

Metric retail sizing is what Ecosa's table uses, 150 x 200 cm for the king and 180 x 200 cm for the super king. It lines up with European imports, which are usually 200 cm long where UK mattresses are 191 or 198 cm.

The word "queen" adds another wrinkle. It is not a standard UK size, and retailers use it inconsistently, for the small double (120 x 190 cm) or sometimes the super king.

Elsewhere, "king" is not one size

Per Wikipedia's bed size entry, a king is 165 x 203 cm in New Zealand and 152 x 198 cm in the UK, while the US version is 193 x 202 cm. Portugal's king is 180 cm wide.

That matters when ordering across borders. Ecosa notes that US twin sheets run wider than an Australian single (99 cm vs 92 cm) and feel loose.

Ecosa measures the US twin at 99 cm, an inch wider than the 38 inch figure in the chart above. The reason comes up in the section on chart numbers that don't match the mattress you buy, further down.

Do Bed Frames, Box Springs and Sheets Match the Mattress Size?

The size label carries over to all three, but each has a second measurement that matters. For a frame it's the outer width, for a foundation the height. Sheets depend on pocket depth.

Bed frames

Queen frame typeOuter width (in)Margin per side (in)
Platform, close-fit61 to 640.5 to 2
Standard traditional65 to 682.5 to 4
Upholstered66 to 723 to 6
Four-poster or canopyAbout 68 to 784 to 9

Mattress Nut's numbers show how much a single size can spread, and it gives four-poster frames as 2 to 6 inches wider than upholstered ones. Frame dimensions are not standardized between manufacturers, so check the listed outer width before measuring the room. The frame types in the calculator use a margin inside each of these ranges.

Box springs and foundations

A box spring has to match the mattress size (Living Spaces). It doesn't bend the way a mattress does, so large sizes often ship as split halves. A king foundation is commonly two 38 x 80 inch twin XL units, and Mattress Firm lists a split queen as two 29.5 x 80 inch units.

Queen and king box springs need a frame with a center support bar. Most mattress warranties require a box spring or compatible foundation, and the floor can void coverage.

A slatted frame with only a few inches between slats can replace the foundation, according to Living Spaces.

Fitted sheets

Pocket depth decides whether a fitted sheet stays on, and size labels say nothing about it. Mattress Miracle puts standard pockets at up to 12 inches of mattress depth, deep pockets at 13 to 17 and extra-deep at 18 and above.

Its rule is mattress depth plus any topper plus 2 inches, so a 12 inch mattress with a 3 inch topper needs a pocket of at least 17 inches.

The tiers are not official. Mattress Miracle's own 2026 guide notes that no industry body certifies what counts as "deep," and it puts deep pockets at 14 to 18 inches, with some brands keeping the label for 16 inches and up.

How to Choose the Right Bed Size, Step by Step

Order matters here, since each step narrows the next one.

  1. Start by counting the sleepers. One adult points to a full or twin XL. Two adults start at queen, and a regular child or pet visitor pushes toward king.
  2. Next, measure the tallest sleeper, add 6 inches, and compare the result with the 75, 80 and 84 inch lengths.
  3. Measure the room, not the mattress. Use the frame's outer width plus 24 inches on each side you walk.
  4. Tape the footprint on the floor. Mattress Stores Los Angeles suggests taping out the dimensions before buying, and Bensons for Beds advises checking door widths and staircase width before ordering.
  5. Check the delivery path too. Mattresses flex around corners and foundations do not, so buy a split foundation if the stairs are tight.
  6. Last, match the base and sheets. Order the foundation in the same size, and sheets with pocket depth of mattress plus 2 inches.

With the tape down, look at how the bed sits against the other furniture. Guidance on scale and proportion in a room helps with that call.

Tie-breakers when two sizes fit

A common tie-breaker is to size up when length, width per person or walking clearance comes out borderline.

That rule needs one exception. Clearance is the only factor a bigger bed makes worse, so if the room is the borderline one, size down.

When Do Bed Size Chart Numbers Not Match the Mattress You Buy?

Usually it's rounding and manufacturing tolerance, plus brand differences. Sleep Foundation calls width and length standardized for each size, yet published tables still differ by 1 to 2 inches.

Where published sizes disagree

MeasurementCommon figureOutlier figureOutlier source
Twin width38 in (Wayfair, Saatva)39 inLiving Spaces, Sherman's, Mattress Firm
King width76 in78 inSherman's
California king length84 in83.5 inWikipedia
Australian single length188 cm (Luxo Living)187 cmbedsizes.biz

Sherman's says its figures can vary by plus or minus 0.5 inch, and Wikipedia lists sizes to the nearest half inch. UK mattresses may legally vary by up to 2 cm from the quoted size.

Sizes outside the chart

The Brick notes that RV and custom builds follow their own measurements and sit outside standard charts. Purple notes that sizes can vary by an inch or two from brand to brand, and Wikipedia adds that UK frame sizes are not standardized between manufacturers.

Where the gap causes real damage

Split foundations are the sharpest case. One Mattress Firm foundation lists a king as two 39 x 80 inch halves, while National Mattress and Mattress Miracle list 38 x 80 inch halves.

The first pair measures 78 inches across, 2 inches wider than a 76 inch king mattress, so the halves can fail to seat in a frame sized to the mattress.

Before buying, check the manufacturer's spec sheet for the mattress, the frame's outer width and each foundation piece. Then measure the mattress itself, since a tape measure beats any chart.

Bed Size Chart FAQ

Is a full bed the same as a double bed?

Yes, in the US. Wayfair lists a full, also called a double, at 54 x 75 inches.

The name doesn't carry over to other countries, though. A UK "small double" is 48 inches wide, and it is also called a three-quarter bed.

Which bed size is the most popular?

Queen. Hudson's Furniture names it the most popular size for both single adults and couples.

Bed Buyer's 2020 survey found the same for Australia, where around 61 percent of adults sleep on a queen.

How many standard bed sizes are there?

It depends on who counts. Wayfair lists five, Casper six (adding twin XL), and Home Depot eleven.

Mattress Stores Los Angeles lists six core sizes, twin XL included, and puts full XL and Olympic queen in a separate specialty table.

What is the biggest bed size you can buy?

By area, the family bed. The Alaskan king (108 x 108 inches) is usually named the largest mattress, yet Wikipedia's bed size entry also lists an XL family bed at 144 x 84 inches that covers more floor (12,096 vs 11,664 square inches).

That family bed equals two California kings side by side.

Does a bunk bed or daybed use a twin mattress?

Usually, yes. Wayfair notes that standard daybeds match twin beds in size and typically take a twin mattress, and Mattress Direct lists bunk beds among the usual uses for a twin mattress.

Confirm the frame's listed mattress size before ordering.

How do I convert bed dimensions from inches to centimeters?

Multiply each inch figure by 2.54. A 60 x 80 inch queen converts to 152.4 x 203.2 cm.

Retailers round the result, which is why some list the same queen as 152.5 x 203 cm.

What Does Moving Up a Bed Size Cost?

Each step up the bed size chart adds cost. Tom's Guide (updated November 2026) puts the average of its best king picks at around $1,500 against about $1,200 for a queen, a premium of about 25 percent. Amerisleep's cheapest model steps from $899 to $1,199 over the same jump (October 2026), closer to one third.

Settle floor space and walkway clearance first, then sleeper height and shared width. Price comes last because sales move it while sleepers and floor space stay fixed.

Oversized sizes such as the Alaskan king cost 30 to 60 percent more than a comparable standard king, and custom orders mean longer lead times (Amerisleep).

Sizing the rug under the new bed is the natural next step, and a calculator for rug size handles the maths.